NAMES
CARIF 260
LOCATION
METALSHOP
BASIC OPERATIONS
CUT, MITRE
SIZES
100MM CROSS SECTION, 2000MM LENGTH
MANDATORY REQUIREMENTS
COMPLETION OF METAL ESSENTIALS
MATERIALS
ONLY USE MATERIALS SUPPLIED BY THE LAB
HAZARDS
CONTAMINATED CUTTING FLUID
PROJETILS THROWN FROM MACHINE
REMEMBER
ALWAYS WATCH THE MACHINE
ALWAYS STOP THE MACHINE BEFORE MAKING ADJUSTMENTS
WHAT IS A HORIZONTAL BANDSAW?
The Carif 260 BSA is our semi-automatic bandsaw, with double mitre facility and full hydraulic operation of the vice and sawframe. Its two speed motor allows cutting of a a wide range of metals.
WHAT IS IT FOR?
Used along with our tiger stop the bandsaw is used to accurately cut steel and aluminum sections, both hollow and solid.
2. Insure the stock is securely held in the vice.
3. Always stop the machine before making adjustments
both solid and hollow
The above is a revolution slider
The above is a SketchFabb embedded in an iFrame
2. Insure the stock is securely held in the vice.
3. Always stop the machine before making adjustments
both solid and hollow
The above is a SketchFabb embedded in an iFrame in Slider Revolution
The above is a Modelo embedded in an iFrame
We have five Trotec laser cutters, they are named Mies, Jorn, Alvar, Zaha and Liz. They have important differences:
Zaha and Liz are 100w and they are also bigger than the other three, their bed size is 1000mm x 610mm. Their only limitation is that they do not cut MDF.
FABRICATION LAB
University of Westminster
College of Design, Creative and Digital Industries
35 Marylebone Road, London NW1 5LS
Office@FabricationLab.London
Something not working? Contact the webmaster: Webmaster@FabricationLab.London